ResMed AirMini
Find the message on your screen below. Most alerts clear with a simple check: the water chamber seated, the tube connected, the filter clean. If a code keeps coming back after the fix, stop using the machine and contact your equipment supplier or the manufacturer.
What it means: The machine has detected an error.
What to do: Unplug the machine, wait a few seconds and plug it back in. If the light keeps flashing, contact your equipment provider and do not open the machine.
What it means: Bluetooth is turned off (airplane mode), so the app cannot connect.
What to do: Press the Bluetooth button for 3 seconds. When the light flashes blue, the machine is ready to pair.
What it means: The machine is discoverable and ready to pair with your phone.
What to do: Finish pairing in the AirMini app by selecting the machine and entering the four-digit key or scanning the QR code on the back.
What it means: The machine is not connected to your phone. The light also fades once therapy starts, which is normal.
What to do: If you need the app, open it and reconnect. If it will not reconnect, see the troubleshooting tips for Bluetooth.
What it means: The machine is not getting power.
What to do: Make sure the power supply plug is fully inserted into the machine and the wall outlet, then check both green lights again.
No matching code. Check the exact text on the screen, or see the troubleshooting section on the machine page.
Last reviewed October 11, 2026. How we research · Report an error