ResMed AirCurve 10 VAuto error codes and alerts

High leak (tub) High leak detected, check your water tub, tub seal or side cover

What it means: The water tub or its seal is not inserted properly.

What to do: Reseat the tub and check the seal is pressed in all round.

High leak (tubing) High leak detected, connect your tubing

What it means: The tubing is loose or the mask is not fitted correctly.

What to do: Push the tubing firmly onto both ends; refit the mask or run Mask Fit.

Tubing blocked Tubing blocked, check your tubing

What it means: Airflow in the tubing is blocked.

What to do: Clear the blockage, press the dial to clear the message, then press Start/Stop.

SD card error SD card error, remove your card and press Start to begin therapy

What it means: The SD card may not be inserted correctly.

What to do: Remove and reinsert the card.

SD card read only Read only card, please remove, unlock and re-insert SD card

What it means: The card's lock switch is in the read-only position.

What to do: Slide the switch to unlock and reinsert the card.

Error 004 System fault, refer to user guide, Error 004

What it means: The guide lists: machine left somewhere hot, a blocked filter, blocked tubing or water in the tubing.

What to do: Let it cool, replace a blocked filter, clear or empty the tubing, then disconnect and reconnect the power supply.

Error 0XX (other numbers) System fault, refer to user guide, Error 0XX

What it means: An unrecoverable error has occurred on the device.

What to do: Contact your care provider. Do not open the device.

Humidifier indicator Sleep Report: Humidifier might be faulty, contact your care provider

What it means: The humidifier may not have worked properly that night.

What to do: Check the tub is seated with water in it, and contact your care provider if it repeats.